[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sync Motor :-( wiring & schematic



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Kidd6488-at-aol-dot-com>

Some people have asked if there is any problem with the wiring. So I made a 
schematic of the motor to make sure all was well. 

hot-streamer-dot-com/jonathon/schematics/motor1.jpg 

Can somebody with a 1/3 HP give me some resistance measurements of their 
windings, so I can check mine? 

Thanks, 

--------------------------------------- 
Jonathon Reinhart 
hot-streamer-dot-com/jonathon