Re: Epoxy

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Clearspring1-at-aol-dot-com>

Hi Ben,

Yes, epoxy will hold acrylic to copper.  Roughing any polished surfaces will 
increase the holding power quite a bit.  At the least the surfaces should be 
thoroughly degreased.

Regards,

Michael Tandy

> All,
>  Does anyone know if epoxy will hold acrylic to copper? (The 2 plunger 
"shot"
>  type where you mix the resin and such?)
>  Thanks,
>  Ben
>