Re: Biggg Coil running again

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "bob by way of Terry Fritz <twftesla-at-qwest-dot-net>" <forlaser-at-gte-dot-net>

i'm new again to the list..
whats the low down on this coil..
got any info on it, or a web page?

-----Original Message-----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Date: Saturday, July 07, 2001 11:32 PM
Subject: Biggg Coil running again


>Original poster: "Kevin R Eldredge by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <kreld-at-juno-dot-com>
>
>All
>
>  The Bigg Coil was disassembled last Fall waiting for its new home where
>it can be perminantly assembled & ready to fire at a moments notice.   At
>last a Tesla Coil "hanger" was built this last several weeks measuring
>10' wide x 10' deep x 16' tall with two 15' doors.  Features include an
>electric hoist on the rafters to work on the Coil & a work loft at 12'
>for maintainance on the toroid.  It takes 5 minutes to roll out its 24'
>runway and wire up.
>
>  Of coarse it was tested Saturday with less than favorable conditions,
>like a 7 to 10 mph wind.  Still it gave respectable 22' arcs to the
>hanger.   With the wind, the arcs wout start on the windward side of the
>8' toroid, hit the ground, and rotate 180 degrees on the ground to the
>opposite side then break up,  another arc would start and repeat again.
>
>
>  The 120 bps rotary had some arc follow around when wired in series with
>the vacuum static gap using 2 gaps.  I increased it to all 5 gaps, and
>output dropped to nill.   The static gap was bypassed all together, and
>rotary follow around stopped, the output arcs brightened nicely.
>
>  I am planning on installing a resistive voltage divider to take voltage
>measurments accross the capacitor and transformer outputs.  This would be
>tied directly to the vertical deflection plates of an old tube type
>scope.  Any suggestions on this idea are welcome.  The scope has already
>been modified for direct vertical inputs.
>
>Coiling in Oklahoma
>
>Kevin E.
>________________________________________________________________
>
>