RE: rotary gaps

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Basura, Brian by way of Terry Fritz <twftesla-at-uswest-dot-net>" <brian.basura-at-unistudios-dot-com>

Bob,

I set mine at .020" for a total gap of .080" (IF I'm comfortable with the
rigidity of the complete SRSG setup).

Regards,
Brian B.

 -----Original Message-----
From: 	Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent:	Friday, January 26, 2001 6:26 PM
To:	tesla-at-pupman-dot-com
Subject:	rotary gaps

Original poster: "bob golding by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<yubba-at-clara-dot-net>

Hi all,
    I have almost finished my rotary gap and am at the stage of
adjusting the gap spacing. Anyone suggest a good starting point for the
gap. I am running a 8 kv 250 ma radar transformer with up to 97 nF of
cap into a 10" x 42" secondary. It is drawing around 12 amps from my 240
volt supply. The electrodes are 4.8mm tungsten. I am using 4 flying
electrodes and 4 static.

cheers
bob golding