JavaMMC Update v1.03

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Barton B. Anderson by way of Terry Fritz <twftesla-at-uswest-dot-net>" <tesla123-at-pacbell-dot-net>

JavaMMC has been updated to v1.03. 

Changes: 
* Separated Manufacturer Data and Coil Data Input. 
* Removed Life Expectancy. 
* Replaced C/Watts input for Lead Spacing input (mm). (typical manf. data). 
* Thermal Dissipation Factor (C/Watts) is now an output. 

The manufacter data input parameters are now well within coilers ability and
knowledge. The thermal dissipation factor is based on Terry's table and WIMA
data. 

JavaMMC is an easy online MMC program. Change any input value and recalc as
necessary to optimize your MMC design. 

Operation: 
1) Let page fully load ("Document: Done" at bottom of your browser window). 
2) Enter manufacturer data. Table is available for Terry's known good caps. 
3) Enter personal coil data. 
4) Press the "CALCULATE" button. 
5) View or print output data. 

You can go directly to JavaMMC with this link: 
 <http://www.classictesla-dot-com/java/javammc.html>http://www.classictesla-dot-com
/java/javammc.html 

or from my Site Map: 
 <http://www.classictesla-dot-com/sitemap.html>http://www.classictesla-dot-com/site
map.html 

Take care, 
Bart A. 

ps: As with any html page, you can save the file to your hard drive for offline
use.