Re: Found a schem for 807 powered coil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Mddeming-at-aol-dot-com>

In a message dated 12/12/01 6:44:36 PM Eastern Standard Time, tesla-at-pupman-dot-com
writes:


>
> In addition, Khalid has sent me a pair of PL509 and a pair of PL804.
> I can get a diagram of a VTTC based on these, but can you or someone confirm
> that the 509 has a 40v heater ( 519 a 6.3v heater) before I turn the 509
> into a lightbulb... :-).



Yes, 
The PL509 is equivalent to the 40KG6A and therefore has a 40-volt filament. It
is otherwise operationally equivalent to the 6KG6A/EL509 usually used as a
class A amplifier or horiz. deflection Amp. in color TVs.
Matt D.