Re: Secondary recommendation

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>

In a message dated 7/31/01 3:28:31 PM Eastern Daylight Time, tesla-at-pupman-dot-com 
writes:

> Hi All!
>  
>  I've just about finished tweaking my little 2.5" TC and am planning the 
next
>  one. :-)
>  
>  I have an 11 lbs roll of 19AWG magnet wire and I wanted recommendations 
from
>  the list as to the size of the secondary.  I was thinking 4" PVC since I
>  have a piece of it, but wondered if 6" might be better.
>  
>  Thanks in advance!
>  
>  Mark Stolz

Mark,

the answer depends very much on the input power that will be
used, also the breakrate, and capacitor size, toroid size, etc.
All those things need to be known before it can be determined
what the best secondary size is.

John Freau