[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SRSG mods

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Tesla729-at-cs-dot-com>

In a message dated 7/18/01 2:21:11 PM Central Daylight Time, tesla-at-pupman-dot-com 
writes: 


>
> How about putting another disk (or rod, bar, etc...) on the other end of the 
> shaft of a motor (pending it has a long enough shaft). Then, you could put 
> the two rotaries in series. This would keep electrode wear down to an 
> absolute minimum. 
> Just something to ponder.. 
>
> Ciao, 
>
> -Mike 
>
>



Hi Mike, all, 

My "Medusa" 10 kVA pole pig driven system uses this RSG array. 
Check it out at: < http://www.nex-dot-net/kilroy/david/ >>>> 

Sparking in Memphis, 
David Rieben