[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

help !! loose wire on secondary



Original poster: "Shaun Epp by way of Terry Fritz <twftesla-at-qwest-dot-net>" <scepp-at-mts-dot-net>

Hello Group,  I have yet more questions about making a secondary,

I've wrapped the secondary and started to coat it, up to six coats of poly,
But after the first coat, I noticed some irregularities in the windings. A
few spots have the wire turns sticking out abit, away from the plastic tube
and
when I went to sand it, I toke of the insulation off the wire,  oops.  Its
sticking out about the thickness of the 26 gauge wire I used to rap it.

Question:  Is having the wire stickout a bit in areas going to cause me
lotsa trouble, I'm planning on heavily isulating this coil to compensate for
my goof up??

 Thanks in advance for all your replies, and helpfull responses in the past.
It's good to have the list back online!!

Shaun Epp