RE: RQ spark gap.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Stolz, Mark by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Mark.Stolz-at-st-systems-dot-com>

Kamil,

If you go with 6 gaps, the spacing would be .1984 inches.  If you go with 7
gaps the spacing would be .1701, and if you decide on 5 gaps the spacing
would be .2381.  Hope this helps.

Mark Stolz
G-1 #1049
Houston, TX

>
>Original poster: "Kamil Kompa by way of Terry Fritz <twftesla-at-qwest-dot-net>" 
><tcmail-at-poczta.fm>
>
>Hi!
>
>I'm goaing to make a RQ spark gap for my 1000W coil. My NST is 10kV 100mA.
>How many and how wide gaps schould I make?
>
>Thank You for all answers.
>
>Kamil Kompa
>