Tesla Coil Project.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Kamil Kompa by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tcmail-at-poczta.fm>

Primary Transformer Output Voltage (VAC)
10000.0000
Primary Transformer Rated Current (AMP)
 0.1000
Primary Transformer Input Frequency (HZ)
50.0000
Primary Transformer Input Voltage (VAC)
220.0000
Primary Coil Inside Diameter (IN)
 9.5000
Primary Coil Wire Diameter (IN)
 0.2360
Primary Coil Wire Spacing (IN)
 0.7870
Primary Coil Number of Turns
 5.3000
Primary Coil Angle From Horizontal Plane (DEGREES)
 0.0000
Secondary Wire Diameter (IN)
 0.0179
Secondary Coil Total Outside Diameter (IN)
 4.3300
Length of Secondary Coil (IN)
20.9850
Secondary Wire Gauge
25.0000
Secondary Turns/Inch
53.0726
Top Load Capacitance (PF)
17.4833
Sphere Radius/Toroid Tube Diameter (IN)
 4.0000
Toroid Diameter Tube Center-to-Center (IN)
11.8100
Primary Transformer PFC Rating (%)
75.0000

Hi !

Im goaing to make such coil. Please let me know what do you think about its
construction.
Is my project OK?
What do you think about using flat primary in such coil? Is this a good choice?

Thanks

Kamil Kompa


-------------------------------------
Wybory 2001: Rankingi przedwyborcze
http://wybory2001.interia.pl/rankingi