Re: On the Fly tuning

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-uswest-dot-net>" <jasonp-at-btinternet-dot-com>

If you use a motor and then hotwire it to the battery be very careful. I was
using a DC motor and nearly got fried when a streamer hit the battery wire
(dunno how). Use 2 bits of coax cable and connect the outer rings to ground
to be safe!

Best of luck,
Jason

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, April 28, 2001 11:51 PM
Subject: Re: On the Fly tuning


> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<A123X-at-aol-dot-com>
>
> Ok. I couldn't remember what you had been using for the on the fly tuning.
I
> thought it was different.
>
> In a message dated 4/28/01 3:13:29 PM Eastern Daylight Time,
tesla-at-pupman-dot-com
> writes:
>
>
> >
> > Check the archives there was a discussion about a week ago when i tried
it
> > and yes it does work - poorly
>
>
>
>
>
>
>