[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Terry RF filter construction details



Original poster: "jpeakall by way of Terry Fritz <twftesla-at-uswest-dot-net>" <jpeakall-at-mcn-dot-org>

Sorry to keep posting...

Terry, how are the MOVs and caps connected to the power in and the power
resisitors? Insulated jumper wires soldered to the leads, or a piece of
solid copper wire? Sure wish I could see the backside of your unit! ;-0

I noticed in the small coil filter that you placed the 10mOhm resistors
under the caps. I couldn't see them in the large coil picture. Are they
mounted on the back?

Thanks much for your time,

Jonathan Peakall