[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ballast core

To: tesla-at-pupman-dot-com
Subject: ballast core
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 10 Apr 2001 18:18:46 -0600
Resent-Date: Tue, 10 Apr 2001 18:42:03 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <jg9PuC.A.tm.Zh606-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <CTCDW-at-aol-dot-com>

Hello all!

OK, here goes.. I now have silicon steel laminations. they are 3.75" X 26.5" 
and the whole stack comes to a bit under 1.25". Two questions: Will this sq 
inch area be enough to wind a ballast inductor? (for a 10kVA transformer). 
should I cut these in half and make it half as long, but twice as thick?
Thanks as always,


Chris W

Prev by Date: MMC?
Next by Date: C & H electronic surplus
Prev by thread: RE: ballast core
Next by thread: creepage discs
Index(es):
- Date
- Thread