[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Spark gap



Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <uncadoc-at-juno-dot-com>

Hi Jason, I am not one to get into many measurements, I run a eight
segment gap probably quite similar to yours and used a old credit card to
space the gap.  Worked out real good for me.  You could even slice the
card up into small segments and place them between each gap while you
fiddle with your mounting arrangement and/or epoxy.  I have also heard of
some folks using a postcard for their gaps.   AL.

On Mon, 09 Apr 2001 11:55:37 -0600 "Tesla list" <tesla-at-pupman-dot-com>
writes:
> Original poster: "Jason Petrou by way of Terry Fritz 
> <twftesla-at-uswest-dot-net>" <jasonp-at-btinternet-dot-com>
> 
> I have a seven segment linear spark gap - what is the correct 
> spacing to use
> between each piece of copper pipe? 
>  
> Jason
> 
> 
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno-dot-com/get/tagj.