[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

My first secondary

With the wire I've scrounged from transformer rewind co's, the secondary I 
have planned is as follows:
.2 cm Magnet wire, presumably this will give about .3 actual spacing? (I 
don't think it's a good idea to space it any further).  About 900 turns 
around a 2 inch form gives 27cm high (a bit less than 12 inches).  Does this 
sound right? My only other option is .56mm magnet wire which I think is too 
thick for a 2 inch form.