[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Fw: Polypropylene coil form
I didn't worry about the glue because I see it as only a means of holding
the twine or wire in place until the final varnish coat is applied. Let
it dry up, for all I care!
As to my documentation, it's all ready, but I have to
procure/assemble/debug/wire up etc. the several more p.c. boards that
will make up the full-scale machine. I don't want to offer my design
until I've done that. Perhaps you've heard of Murphy's Law: in my shop,
Murphy is alive & well.
On Mon, 04 Sep 2000 17:59:50 -0600 "Tesla list" <tesla-at-pupman-dot-com>
> Original poster: "Luc" <ludev-at-videotron.ca>
> Tx Kennan
> I remember your posting My concern is how the glue on the double
> side tape
> will age.
> By the way I check your patent and I almost can't wait for you
> Luc Benard
> Tesla list wrote:
> > Original poster: "Kennan C Herrick" <kcha1-at-juno-dot-com>
> > Luc-
> > See my "recipe" postings of 8/19 & 8/20 for how I made a
> secondary. I
> > recommend 2-side "sticky-tape" for holding the wire in place prior
> > varnishing it. I would think that would stick to polypropylene--at
> > long enough & well enough to hold the wire. If not, perhaps you
> > rough-up the poly with sandpaper to give a "tooth" for the tape.
> > Ken Herrick
> > --------- Forwarded message ----------
> > From: "Tesla list" <tesla-at-pupman-dot-com>
> > To: tesla-at-pupman-dot-com
> > Date: Sun, 03 Sep 2000 16:59:05 -0600
> > Subject: Polypropylene coil form
> > Message-ID: <4.1.20000903165903.009f7f00-at-pop.dnvr.uswest-dot-net>
> > Original poster: "Luc" <ludev-at-videotron.ca>
> > <snipped>
> > I have 2 nice piece of 4.5" polypropylene pipe, I want to make
> > with them .
> > <snipped>
> > Do you have advice ?
> > Tx
> > Luc Benard
> > ________________________________________________________________
> > YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> > Juno now offers FREE Internet Access!
> > Try it today - there's no risk! For your FREE software, visit:
> > http://dl.www.juno-dot-com/get/tagj.
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit: