[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: How many strings should you have in parallel?
- To: tesla-at-xxxxxxxxxx
- Subject: Re: How many strings should you have in parallel?
- From: Terry Fritz <twftesla-at-xxxxxxxxxx>
- Date: Mon, 13 Nov 2000 18:36:51 -0700
- Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme
- In-Reply-To: <002a01c04dbc$03ba3820$3a6b97d4-at-swipnet.se>
Hi Mattias,
The following program and document are meant to answer this question:
http://hot-streamer-dot-com/TeslaCoils/Programs/Mmccalc2.zip
http://hot-streamer-dot-com/TeslaCoils/MMCInfo/MMCPower4.html
Cheers,
Terry
At 10:52 PM 11/13/2000 +0100, you wrote:
>
> Here is another one on MMC construction. I'm building a tankcap for a
> 10kV-at-45mA NST and will then need a 14.32nF capacitor. I was then thinking
> about using 33 caps (0,47uF-at-1500VAC each) put in series for a 20kV 14.2nF
> tankcap. The frequency of the primary circuit will be about 200kHz.
> Then the question is raised: Do I need to put several lower valued strings in
> parallel to achive better current durability or could I just change the
> frequency of the primary to a more suitable value.
> (or maybe I don't have to change anything at all :) )
>
> Mattias