[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Another RSG Question
- To: tesla-at-xxxxxxxxxx
- Subject: Re: Another RSG Question
- From: Terry Fritz <twftesla-at-xxxxxxxxxx>
- Date: Fri, 10 Nov 2000 16:39:33 -0700
- Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme
- In-Reply-To: <20001110225929.10349.qmail-at-web3105.mail.yahoo-dot-com>
Hi Adam,
I just use a 1/2 drill chuck. ;-)
http://hot-streamer-dot-com/TeslaCoils/MyCoils/SmallCoil/small_gap1.jpg
Cheers,
Terry
At 02:59 PM 11/10/2000 -0800, you wrote:
>My smaller motor has a 1/4" shaft, so I simply used my
>3/8" drill chuck to attach my RSG rotor. My new motor
>has a 1/2" shaft with a flat side, that I need to
>connect my large rotor to. I noticed most people seem
>to have custom hubs machined for attaching their
>rotors. I've looked all through mcaster-dot-com and am
>sure they have something I can use, if I only know
>what it's called. Has anyone managed to find a premade
>hub that they could use?
>
>thanks
>
>Adam
>
>=====
>Adam Minchey
>yurtle_t-at-yahoo-dot-com
>www.geocities-dot-com/yurtle_t/index.htm
>
>__________________________________________________
>Do You Yahoo!?
>Thousands of Stores. Millions of Products. All in one Place.
>http://shopping.yahoo-dot-com/
>