Re: Rectification and asundry Shtuff.

• To: tesla-at-pupman-dot-com
• Subject: Re: Rectification and asundry Shtuff.
• From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 11 May 2000 20:30:55 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

hi shad
 there is a company by me that sells applience repair parts(you name it
they got it).
 they have hv diodes cheap 12kv 550ma about $4.00, 15kv 750ma about$8.00
and so on. they also sell mot's 4.1kv 350ma anode and much more. there #
is 1-800-783-2680, shore appliance parts,euclid ohio. they have a lot of
goodies the catalog is well worth geting.
 i have a couple coils that have splices in the wire, they work fine.
60"+ discharges.
i just scraped the mag wire clean then twisted together tightly with
linemans plieres, after that i cut the twist close with side cutters(1-2
twists)then folded over in the direction of the wraping. after i sprayed
the whole sec. coil with motor varnish i put a dab of hot glue on the
splice flattened it ot with a wet finger befor it cooled. then sprayed
it again. i read the resistance of the coil to check for a good
conections and have never had a problem of any kind from it.
 i would have liked to do it all in one run but you have to do what you
have to do. i was using 21awg wire at the time so a smaller might be a
little tougher.
anyway get the catalog you might even be able to fix that old washing
machine. marc

• Prev: Re: Coiler Location
• Next: Re: !Salt Water Caps and Heavy Formula's!
• Index(es):
  • Main
  • Thread