[Prev][Next][Index][Thread]

Re: 2 spools?




----- Original Message -----
From: "Tesla List" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, May 10, 2000 7:38 AM
Subject: 2 spools?


> Original Poster: ANTarchimedes-at-aol-dot-com
>
> Could I tie the ends of two wire spools together and wind it as a
secondary
> or must the wire all be one piece?
>
>

I would use I single piece,If you tie two wires together there will be a
"bump" which would most likely act as a discharge point producing a "hot
spot" which will cause the secondary to fail and you probably have
discharges from the bump to the primary or from the bump to the topload and
vise-vera.....not a good thing :(

Hope this helps,
Kevin Dalpe