[Prev][Next][Index][Thread]

Re: Mylar Interlayer Insulation



Hi

The problem I see with mylar is that stuff is not really resistant to heat
and get deform when heated.

Luc Benard(Montreal)

Tesla List wrote:

> Original Poster: "Dan Kunkel" <kunk77-at-juno-dot-com>
>
> Max aka Frankenstein's Helper,
>
> My archives reveal that mylar has an excellent breakdown voltage of 7500
> volts per mil (or thousanth of an inch) and a dielectric K value of
> 3.0-3.1 The 7500 volt value I think is for DC current, you will want to
> overbuild your insulation a bit anyway for added protection. Hope this
> helps...
>
> Dan
> ________________________________________________________________