Re: Building a Primary

• To: tesla-at-pupman-dot-com
• Subject: Re: Building a Primary
• From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 19 Mar 2000 15:05:00 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

>Original Poster: "David W" <Dav_W926-at-hotmail-dot-com>
>
>     Does anyone have a good method of connecting the ends of copper tubing 
>in a
>primary when the primary is made of 2 seperate pieces of copper tubing?
>
>     ~Dave

Hi Dave, 
                 I made an insert which fitted inside the two pieces to be 
butted by cutting off an inch long piece and slitting it down its length, 
then squeezing it into a smaller diameter. I used ordinary solder and 
a plumber's gas torch to heat the metal.

Regards,
Malcolm

• Prev: Re: Secondary form materials
• Next: 1 15kv -at- 60 or 2 15kv's -at-30?
• Index(es):
  • Main
  • Thread