Re: progress report (ballast)

• To: tesla-at-pupman-dot-com
• Subject: Re: progress report (ballast)
• From: "Mike Harrison" <mike-at-whitewing.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 10 Mar 2000 06:53:58 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

On Thu, 09 Mar 2000 19:59:25 -0700, you wrote:

>Original Poster: "bob golding" <yubba-at-clara-dot-net> 
> Any help
>on  calibrating the current  probe  welcome. It would be nice if it had a
>linear response between 1.5 and 15 amps. 
If you can measure lower currents, you can calibrate by winding
several turns through the probe - e.g. 1 amp through 10 turns is
equivalent to 10 amps through 1 turn etc.

PS. UK coilers - Picketts Lock radio rally is this weekend Sat/Sun

• Prev: Discharge impedance of a CW Tesla coil
• Next: Unpotting is a pain in the ... neck.
• Index(es):
  • Main
  • Thread