[Prev][Next][Index][Thread]

Re: So Maybe MOTs Don't Rule



Alex,

I'm using 100 Ohm resistors on each output terminal of the doubler.  Yes,
they are the only thing between the power supply and the Tesla tank
circuit.  100 Ohms is pretty low but I suspect there's a significant
inductance in them as well which is good for RF isolation.

Best Regards,

Greg

At 04:09 PM 03/08/2000 -0700, you wrote:
>Original Poster: "Alex Crow" <user-at-alexcrow.clara-dot-net> 
>
>Greg
>
>What value resistors are you using? Are they between the doublers and the
>gap/cap connection? This is the only thing limiting charging current, right?
>
>Alex