Dr. Res: Re: Preparing for test

• To: tesla-at-pupman-dot-com
• Subject: Dr. Res: Re: Preparing for test
• From: "Alex Crow" <user-at-alexcrow.clara-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 07 Mar 2000 12:26:53 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Sorry, I meant 5 times as long as the diameter - a 1:5 length to diameter
should be very sqat!!!!!

Alex

Tesla List wrote:

> Original Poster: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net>
>
> With this short aspect ratio be sure to use a few insulating disks inside
> the sec coilform approx 5-6 inches in on each end --- this will prevent
> internal flashover and burning of coilform on the inside where you can't see
> it until it is too late.  Been there -- done that with coilforms under 2.5:1
> .aspect ratio.  Silicone in place with a large 1/4 inch bead of GE Silicone
> II.
>
> Dr. Resonance

• Prev: Re: Floating Neutrals (Was NSTs... DEADLY)
• Next: Re: The worlds Largest Coil
• Index(es):
  • Main
  • Thread