RE: I am a european!

• To: tesla-at-pupman-dot-com
• Subject: RE: I am a european!
• From: "Bruce Ives" <brucei-at-bellsouth-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 03 Mar 2000 12:19:14 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

I'm not sure if there is a formula determine  wire diameter by gauge 
number. ( AWG seems to vary slightly depending on who you get your chart 
and/or wire from) Easiest  to determine the wire diameter from an AWG chart 
and do a mils to millimeters conversion  (mils  X .0254)
Bruce

At 04:59 PM 3/2/2000 -0700, you wrote:
>Original Poster: "Sarah Thompson" <sarah-at-telergy-dot-com>
>
> > > Example: #22awg wire
> > - 0.6438 mm diameter
>
>What's the formula for wire gauge to mm conversion? Where n = the wire
>gauge, I tried 25.4/n and n * 0.001 as guesses - neither of these came out
>as below.
>
>Sarah
>

• Prev: Re: Effects of the size of toroids
• Next: Re[2]: NST's ARE ALL DEADLY !!!!!!!!
• Index(es):
  • Main
  • Thread