Re: I am a european!

• To: tesla-at-pupman-dot-com
• Subject: Re: I am a european!
• From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 03 Mar 2000 10:57:03 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

it will be something of the form:

diameter = K1 * exp(-K2 * gauge)

since gauges are a geometric progression..

A very approximate formula would be diam (mm) = 2.5 * 10^( - (gauge-10)/20)


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: RE: I am a european!
> Date: Thursday, March 02, 2000 11:59 PM
> 
> Original Poster: "Sarah Thompson" <sarah-at-telergy-dot-com> 
> 
> > > Example: #22awg wire
> > - 0.6438 mm diameter
> 
> What's the formula for wire gauge to mm conversion? Where n = the wire
> gauge, I tried 25.4/n and n * 0.001 as guesses - neither of these came
out
> as below.
> 
> Sarah
> 
> 

• Prev: Staccato Control circuit
• Next: Paralleling Choke for Paralleling a 3 phase variac???
• Index(es):
  • Main
  • Thread