[Prev][Next][Index][Thread]
Oklahoma Biggg Coil update
-
To: tesla@pupman.com
-
Subject: Oklahoma Biggg Coil update
-
From: "Kevin R Eldredge" <kreld@juno.com> (by way of Terry Fritz <twftesla@uswest.net>)
-
Date: Sun, 04 Jun 2000 20:27:18 -0600
-
Approved: twftesla@uswest.net
-
Delivered-To: fixup-tesla@pupman.com@fixme
Hi all
The 15 kVA transformer for the Biggg coil was finished today. I should
have pic's on my web page withen a week at flash.net/~kreld/kevin's.htm.
The final tested output voltage is 23 kV. It was tested in a Jacobbs
ladder and pulled around 150 amp at nearly full input power.
The next phase will be the secondary coil to be started this week.
Preliminary plans call for a 24" x 120" coil wound with #14 t.h.h.n.
p.v.c. wire. Updates as progress continues.
Safe coiling
Kevin E.
________________________________________________________________