SRSG Newbie questions

• To: tesla@pupman.com
• Subject: SRSG Newbie questions
• From: "Alan Sharp" <AlanSharp@compuserve.com> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Thu, 01 Jun 2000 16:56:22 -0600
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

Message text written by INTERNET:tesla@pupman.com
>Hello,
I'm preparing to build a SRSG that can handle up to 2 - 2.5 KW:

What determines the diameter of the disk I should be spinning? I have seen 
many in the range of 7" - 12"  Which size is correct?
My next question is about motor HP.  How much HP do I need?

I'm handling 6-8kW with an async 390BPS. disc is about 8* diameter.
1/4 HP would be sufficent.
I'm using a 1/2 HP modified electric grinder which works well.
Another trick that I use - 
is that instead of using 8 rotating electrodes and 2 stationary
electrodes, I use 4 rotating electodes and 2 sets of stationary
electrodes offset by 45 degrees.

full details on my website on the "Bride of Frankenstien" page
http://ourworld.compuserve.com/homepages/alansharp/

Alan Sharp (UK)

• Prev: Re: Terry's NST Filter Network
• Next: Re: duh
• Index(es):
  • Main
  • Thread