[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Big Flywheel approach to synchronous RSG
In a message dated 7/30/00 2:47:01 PM Pacific Daylight Time, tesla-at-pupman-dot-com
writes:
> Maybe the size of the flywheel would be impractical, but I don't see why
> since there is little variability in the load of a spinning disk with
> electrodes so the flywheel would not have to be that big. Any comments are
> welcome on what might be a ridiculous idea.
>
> Dick
Dick,
You're basically building a servo system like in a VCR. You might
need two loops, a speed and phase loop. It could be done, but it
seems a lot easier to just use an AC sync motor.
cheers,
John Freau