Re: primary turns

["J. Kooiman" <jkooi-at-wish-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

 Hi alex,

 > How does one determine the correct number of turns for the primary. I
have
> wintesla.

 Well, that should be enough.


 > In wintesla the primary and secondary don't seem to integrate.

 Yes, they do.
first, set your topload, primary, and secondary settings.
exept for the primary windings, this you have to set according to the number
of pri. windings.

 this means (having set all) you have to know the cap value, and change the
number of primary turns until you reach your cap value.

 regards Jeroen Kooiman, Holland
web www.crosswinds-dot-net/~jeroenk