[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: sizes of the coil
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, July 29, 2000 12:27 AM
Subject: sizes of the coil
> Original poster: "J. Kooiman" <jkooi-at-wish-dot-net>
>
> Hi all,
>
> are there standard sizes or dimentions to be used best for a TC.
>
> with this I mean like :
>
> space between primary windings
5-10 mm,depends on your isolation (if any)
> space between primary and secondary
1"-2"
> ratio between primary and secondary
as big as possible.
> ratio of the secondary in with and length
1:4 for smaller,1:3 for larger coils
> size of tank cap with secondary/primary size
depends on the current your supply transformer is capable to deliver
> turoid size to secondary size
as big as possible
Hope this helps
>
>
> I would really appreciate it if all questions could be awnserd, than they
could
> also be put on my beginners page.
>
> greetings and thanks in advance
> Jeroen Kooiman from Holland
> WEB : <http://www.crosswinds-dot-net/~jeroenk>www.crosswinds-dot-net/~jeroenk
>
>
>