Re: threaded brass rod

["Richard Kircher" <richard.kircher-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Ted,
	You could probably find a 3 to 4 inch brass bolt at a good hardware store
and cut the head off if it really needs to be a rod.  For this capacitor
component mounting application, I think steel would work fine.
Dick


At 11:59 AM 7/5/00 -0600, you wrote:
>
>Since brass is suggested over steel, can anyone offer a common source (in the
>US) of 1/4-20 threaded brass rod? Haven't checked McMaster yet but they
likely
>have it. I just don't need several yards. Just enough to tie together 5 perf
>boards of my EMMC.
>
>Thanks all 
>
>Ted R. 
>