Re: Arc pulling, was Touching/Sitting on your coil

["Bryan Steinbach" <warp27-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

> DO NOT USE BLACK PVC (or ABS) FOR ANY TYPE OF JESUS STICK! The Black is

> frequently made with Carbon and your "Insulator" will bite you. Use
White, 
> clear, Green, and if you're a little daring grey. But never Black. I
believe 
> Grey is safe, but I've never used it.
> 
> 
> I am running a 12/60 nst coil.
> 
>      paul mathus

Hrm, I had no problems running a small 3"x8" coil wound on black ABS that
made 7" sparks...

Bryan Steinbach
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno-dot-com/get/tagj.