[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: High Voltage / Current Coil
Hi Tesla Man,
My small coil is run from a 9000/30 NST. It has a sync rotary so it uses
a rather large 24nF primary cap.
The schematic and a bunch of old pics are at:
http://3634408219/site/misc/NewCoil
These are not exactly "plans" but maybe they will give you some ideas.
Cheers,
Terry
At 03:49 PM 7/3/00 -0500, you wrote:
>Has anyone ever built a coil with a 9000 volt .30 mA transformer. If so,
>could you point me to a webpage that has plans for one, or tell me about
>your experiences... This will be my first coil and I would like to use
>someone else's plans, I've already gotten most everything i need, except the
>Primary, secondary, and mmc bank. After I make my first coil and have more
>money and experience, then I will go for bigger and better Xfrmrs. Thanks a
>million!!
>
- References:
- High Voltage / Current Coil
- From: "Cameron B. Prince" <cbp-at-InternetExpertsLLC-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)