Re: First VTTC light, and a few questions

["Grayson B Dietrich" <electrofire-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Thanks! I was really puzzled at this (as was, apparently, everyone else
;-) I suspected that it might have something to do with RF, as so many
wierd phenomena do...


Grayson Dietrich
http://www.electrophile.8m-dot-com


On Wed, 19 Jul 2000 11:56:23 -0600 "Tesla list" <tesla-at-pupman-dot-com>
writes:
> Original poster: Parpp807-at-aol-dot-com 
> 
> In a message dated 7/19/00 9:17:28 AM Central Daylight Time, 
> tesla-at-pupman-dot-com 
> writes:
> 
> <<  Filament Voltage: 6.6VAC (the meter reads a rising voltage as i 
> increase
>  > the variac controlling plate voltage...  ...when the coil was 
> ill-behaved
>  > it would increase to as much as 10V, now it only reaches 
> 7V...what is
>  > happening?) >>
> 
> Grayson,
> 
> I solved that problem by bypassing to ground each leg of the 
> filament leads 
> with 0.02 - 0.05 uF capacitors. Place the caps right at the tube 
> socket(s). 
> You're getting RF into
> the filament wiring.
> 
> Cheers,
> Ralph Zekelman
> 
> 
> 
> 
> 

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno-dot-com/get/tagj.