Re: drying coil forms

• To: tesla-at-pupman-dot-com
• Subject: Re: drying coil forms
• From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 12 Jan 2000 11:36:01 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

>>
>Hi Guys,
>I just thought of a great way to stay dry and possibly make the job easier.
>Try wrapping  a sheet of that Home Depot vareity polyethelene sheet around
a
>pvc pipe (how you are going to get it to stay there is beyond me though.
>Nothing seems to stick to this stuff).

That clear packing tape wrapped around the plastic.  You could also use the
thin, slightly self sticky packing film they use for palletizing.


 You can use the 4 or 6 mil stuff, it
>doesn't matter. Apply the windings and then the coating. After it cures you
>could probably slide the whole thing off the PVC pipe and then the
>polyethelene sheet could then be removed with a simple tug!
>
>Stay warm and dry!
>S.G.
>
>
>

• Prev: Re: Nathan's Problems Continue...
• Next: RE: MMC?
• Index(es):
  • Main
  • Thread