Primary Tap

• To: tesla-at-pupman-dot-com
• Subject: Primary Tap
• From: "J. B. Weazle McCreath" <weazle-at-hurontel.on.ca> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 09 Jan 2000 20:49:22 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hello Coilers:

What do you fellows with the higher powered coils use for making
the tap connections to your primaries while tuning?  On my new,
higher powered coil, I found that even a good quality alligator
clip wasn't making a solid enough connection and I had to use a
copper clamp bolted in place.  This obviously slows the whole
tuning process down.  Any suggestions?


73, Weazle, VE3EAR/VE3WZL

Listening: 147.030+ and 442.075+
E-mail:    weazle-at-hurontel.on.ca
           or ve3ear-at-rac.ca
Web site:  www.hurontel.on.ca/~weazle

• Prev: Re: HV DC power supply design.....
• Next: Voltage Doubler Problem
• Index(es):
  • Main
  • Thread