Re: Winding a Secondary

• To: tesla-at-pupman-dot-com
• Subject: Re: Winding a Secondary
• From: Michael Tucknott <Michael.Tucknott-at-virgin-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 04 Jan 2000 05:56:52 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Ted

(Big snip snip to keep Terry happy)

> How do most secure a 6 inch diameter tube to whatever is the base of the
> assembly...maybe the platform beneath the primary opening. If you just let
> the end sit there, what prevents it from tipping over? Then ends, of course,
> are sealed with non-conductive epoxy to 6 inch diameter plexiglas disks.
>

Our big coil (9" by 50") has a 10mm MDF disk screwed to the coil form and
through
this are 4 10mm Nylon bolts, these are also held in place by epoxy.

The coil is then bolted to the base unit.

Hope this sheds some light
Mike Tucknott
--------------------------------------------------------
I like having low self-esteem.
It makes me feel special.(Q-Jane Lane)

http://freespace.virgin-dot-net/michael.tucknott/tesla.htm
--------------------------------------------------------

• Prev: SG questions cont'd + power factor
• Next: Re: Full Wave Voltage Doubler with MOTs
• Index(es):
  • Main
  • Thread