Re: Tube Data

• To: tesla-at-pupman-dot-com
• Subject: Re: Tube Data
• From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 24 Feb 2000 08:28:28 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

In a message dated 00-02-24 05:56:44 EST, you write:

<< Original Poster: "Megavolt Nick" <tesla-at-fieldfamily.prontoserve.co.uk> 
 
> Hi Guys,
>              thanks for all your help.  I've eventually managed to get the
> data from an online database.  Its a 2250W transmitter tube.  The anode
> dissipation is 500W, plate voltage 5kV, anode current 400mA.
> I wonder if anyone has ever tried a tube driven magnifier?
> To get the impeadance match right you'd need a large primary which would
> suit the tight coupling of a magnifier driver.
 
> Regards
> Nick Field >>

Nick,

I build a few tube magnifiers, but didn't spend much time on them.
Results were the same as a normal tube coil.

Cheers,
John Freau

• Prev: Re: NST robustness
• Next: Re: DC vs AC TC (was Re: NST->DC Re: CGA Monitor Flyback)
• Index(es):
  • Main
  • Thread