Fr splitting was Re: schematics.........

• To: tesla-at-pupman-dot-com
• Subject: Fr splitting was Re: schematics.........
• From: "Robin Copini" <rcopini-at-merlin-dot-net.au> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 23 Feb 2000 06:43:43 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Dr. Res'.

 Could you explain the reference to energy splitting into two side frequencies
in the post below?

Thanks

 Robin Copini


Tesla List wrote:

> Original Poster: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net>
>
> Your secondary should be at least 1 inch above the primary -- not below.  If
> below the coil will be overcoupled and you will be splitting your energy
> into two "side frequencies" that will be stealing energy from your
> fundamental frequency.  You may also develop "racing sparks" up and down the
> secondary if coupling is too tight.
>
> Checking the coeff. of coupling is detailed in the Tesla Archives section.
> It's a necessary step in obtaining the very best performance from a small to
> medium size coil setup.

<snip>

• Prev: Re: NST->DC Re: CGA Monitor Flyback ???
• Next: Re: Re: Re: Reducing Self Resonance In Rolled Caps
• Index(es):
  • Main
  • Thread