[Prev][Next][Index][Thread]

Re: Secondary design help




> So, my questions are:
>     1:  Will I gain much by using a PE (or similar) form over a PVC form?
>     2:  Is 22AWG wire OK on a 6" coil running at 1.8kVA?
 >    3:  Is my topload of 6x24" too small for my coil?  (I DO intent to make
 >a couple, but I'd like an idea of where to shoot for)
 
>Thanks.
 
 >Mark
  >>

Mark,  

You'll gain nothing using a PE form,  22 awg wire is fine.  that topload 
is OK for now.  most of what's important in a TC is in the cap and 
the spark gap.

John Freau