[Prev][Next][Index][Thread]
Re: maxing out a 4" coil
Hi Ron,
it is possible to 'over power' a coil - however it takes a heck
of a lot of power. The 15/60 will be fine for a 4" coil.
Regards
Nick Field
> Original Poster: "Ron West" <ronwes1-at-juno-dot-com>
>
> I am interested in upgrading my low power 4" coil. Primary is 11.5 turns
> of 1/4" copper tubing wound on 1/2" centers. I was wondering if a 15KV
> 30mA NST might be all I need for the size of this coil, or if it would be
> worth it to go for a 15KV 60mA NST instead. Is it possible to
> "overpower" the coil?
>
> Ron
>
>
>
References:
- maxing out a 4" coil
- From: "Ron West" <ronwes1-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)