[Prev][Next][Index][Thread]
Re: Re: Reducing Self Resonance In Rolled Caps
Hi Ruud,
I think the recipe for a bullet-proof home-rolled cap is well
established:
> Original Poster: "DaxisWeb user" <""-at-mail.daxis.nl>
> Ok, ok, I'am convinced. But it's difficult (for me) to ignore the
> tremendous supply off plastic for free or very cheap. Could the extended
> rolled cap design be improved by applying silicon to reduce creep arcing
> over the plates?
Use as many caps in series as it takes to get peak volts/cap down to
several thousand, thoroughly impregnate them with oil and run them
in oil etc. etc. Applying silicon seems to me to just be extending the
plastic a little further.
Regards,
Malcolm