[Prev][Next][Index][Thread]
Re: schematics.........
Digi-key Electronics for the resistors. Any old TV repair shop or Don Orie
at O-E Technologies in La Madera, NM for the 3 series doorknobs off each
leg.
Dr. Resonance
-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Sunday, February 20, 2000 5:08 PM
Subject: Re: schematics.........
>Original Poster: "Christopher Boden" <chrisboden-at-hotmail-dot-com>
>
>I understand, but isn't the serious danger to NST's from primary strikes?
If
>so, then we're totally safe....for now. We can't even get a decent 10"
>discharge, much less the 2' required to hit the primary.
>
>We were thinking making a protection circuit with Caps, resistors, and
>MOV's, any ideas for designs and parts sources?
>
>>Original Poster: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net>
>>
>>
>>
>>Chris:
>>
>>Advise you strongly resist the temptation to run and tune until you have
>>the
>>protective resistors and caps in place. Unless you enjoy buying NST's.
>>
>>Dr. Resonance
>>
>>
>snip...
>
>