Line Filter Source

• To: tesla-at-pupman-dot-com
• Subject: Line Filter Source
• From: "J. B. Weazle McCreath" <weazle-at-hurontel.on.ca> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 19 Feb 2000 18:11:17 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hello Coilers:

Anyone looking for line filters to use with their coils should check
out business equipment repair shops.  I scrounged some today from a
stack of photocopiers destined for the scrap heap.

The ones I got are rated at 15 amp, 250 volt, and have a 650 uH.
choke in both legs, a 0.1 uF. cap across the legs, and a 3300 pF.
cap from each leg to ground.

Physically they are a cylinder about 2.5 inches long and 1.5 inch
in diameter, with a ground/mounting stud on one end and spade
type tabs for line & load connections on the opposite end.


73, Weazle, VE3EAR/VE3WZL

Listening: 147.030+ and 442.075+
E-mail:    weazle-at-hurontel.on.ca
           or ve3ear-at-rac.ca
Web site:  www.hurontel.on.ca/~weazle

• Prev: Re: Vacuum Pump and Whatnot...
• Next: Re: Building a Tesla Coil
• Index(es):
  • Main
  • Thread