RE: NST de-potting, my technique

• To: tesla-at-pupman-dot-com
• Subject: RE: NST de-potting, my technique
• From: "EXT-Peterson, Phillip P" <Phillip.Peterson-at-West.Boeing-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 18 Feb 2000 16:29:04 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

<snip>

> 4. Place a portable electric burner upside-down on top
>        of the NST.  The burner coil should be in contact with the
>        bottom of the NST case (which is now the top surface)
> 
I would suggest putting standoffs between the electric burner coil and the
bottom of
the NST.  I have seen burner coils short-out by doing this with aluminum,
and could not
guarantee that the same thing might possibly happen with iron/steel.

Phill Peterson (phill-at-iname-dot-com)

• Prev: Re: Toploads that bite
• Next: Rotary Gap info needed
• Index(es):
  • Main
  • Thread