Re: gap spacing

• To: tesla-at-pupman-dot-com
• Subject: Re: gap spacing
• From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 17 Feb 2000 18:40:18 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Gary,
Thanks to you and Ed Sonderman and practically everyone for finally making me 
recheck the phasing on my NSTs. And thank you for following my instructions 
not to underestimate
my stupidity. I'll just keep the sad tale short with the feeble excuse that 
lack of experience caused me to misjudge the correct arc size when testing 
the phasing. Learning has taken
place. I haven't had a chance to test things yet on the MMC and the bipolar, 
I'll post the results as soon as I have any.

When you say that you use a gap of 0.30, is that a single gap, one giant 
leap, or are you using a multiple gap?

Thanks again,

Cheers,
Ralph Zekelman

• Prev: Circuitmaker Pro Simulation
• Next: Re: More Tube Data (was Re: 204 Tube Data)
• Index(es):
  • Main
  • Thread