Re: Big Time Coil Problems...

• To: tesla-at-pupman-dot-com
• Subject: Re: Big Time Coil Problems...
• From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 16 Feb 2000 11:10:27 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

In a message dated 00-02-16 09:10:49 EST, you write:

<< Hi Ryan....
 
 
> Uhoh ...    i think you just blew your caps....   with an input of 150V
> your nst was pumping out 18750V rms  ( with a PEAK V of 26520V ) 
 
> time to make some new caps    build them for 40KV -at- .016uF to .020uF
>  Scot D >>

Scot,

Ryan's mica caps are ac rated if they are mica transmitting caps, so
the voltage is OK probably.  But it is kind of close, and I agree, a much
larger voltage safety margin should be used.

Cheers,
John Freau

• Prev: Faraday cages and Electronics
• Next: Re: NST and GFI ?
• Index(es):
  • Main
  • Thread